0.03 µM Ultrafiltration System Water Treatment For Medicine
Description Of Ultrafiltration System
Ultrafiltration (UF) systems have diverse membrane filtrations
where hydrostatic pressure pushes
solvents against a very fine membrane. They block suspended
particulates and solids that are large while water and solutes with
a lower molecular weight are allowed to flow through the membrane.
Industry and research employ this separation process for purifying
and concentrating macromolecular (103 - 106 Da) solutions, which
are usually protein solutions. Ultrafiltration is similar to
microfiltration, nanofiltration or gas separation, except it
differs in the molecule sizes
it blocks.
Specification
Raw water test report | seawater and brackish water |
Material | SUS 304/ 316/ FRP |
RO Purified water capacity | 70T UF+100T RO |
System recovery | 60%-70% |
Desalination ratio | 97.3%-98% |
System working Voltage/Power | 110V / 220V / 240V/380V/450V 24KW |
Feed water Capacity | 70T UF+100T RO |
Outlet Purified water standard | TDS<1000PPM ; TDS<2PPM for drinking standard |
Feature Of Industrial Ultrafiltration System
The design of the system is according to the municipal water
quality requirements. System configuration and setting can
completely meet the requirement in water conditions, the
energy-saving, simple operation and safety for the principle, And
guarantee system can long-term and stable operation.
Function of each part of water treatment plant:
1. feed water pump -- provide the pressure to quartz sand
filter/active carbon filter
2. Multi-medium filter-- get rid of turbidity, suspended matter,
organic matter, colloid, ect.
3. Active Carbon filter--Remove the color, free chloride, organic
matter, harmful matter, ect.
4. Softener--exchange "ions" of calcium and magnesium with the most
common and easiest method.
5. Security filter--prevent large particles, bacteria, viruses into
RO membrane, accuracy is 5um
6. High pressure pump-- Provide the high pressure to UF system
7. UF system-- main part of the plant.
8. UV sterilizer or ozone generator--- kill bacteria
Ultrafiltration System
1. Import parts over 90%,water conductivity<10μm/cm.
2. Meet GMP Standard.
3. Will be test before shipping.
Ultrafiltration System are used for
1) Drinking water
2) Clarifying and eliminating bacterial for mineral water
3) Water treatment for medicine
4) Separation and refinement of enzyme
5) Concentration and refinement of biologic products
6) Concentration and separation of fruit juice
7) Concentration and refinement of milking
8) Pre-treatment of large water treatment equipment
9) Terminal treatment of ultra-pure water for electronic industry
10) Pouring in water treatment for extremely low permeable wells in
oil field
11) Treatment of industrial waste water and reclamation of usable
water
Ultrafiltration (UF) Systems Advantages
Ultrafiltration (UF) membranes systems are more reliable than a
conventional multi-media filter,
which removed approximately 10 micron or larger of matter, where an
ultrafiltration membrane pore size ranges from 0.01 to 0.10 micron.
In addition to superior turbidity removal, UF membranes efficiently remove bacteria and most viruses.
- Superior filtration performance with high flux
- Very small nominal pore diameter (0.03 µm)
- Efficiently removes bacteria and viruses
- Occasionally back washed and air scoured to boost performance and
removing the fouling
layer to extend operating life
- Low fouling membrane modules
- UF Outside-In or Inside-Out Configuration permits reduced
plugging and higher solids loading
- Basic, vertical, modular design permits low cost, compact systems
- Effective membrane cleaning has a high chemical resistance and
temperature tolerance
